How to tie a bandana bracelet
Learn how to tie a bandana bracelet 4 ways in this fun new tutorial for beginners! When you’re done, check out these methods for how to start and finish a friendship bracelet too. This post contains affiliate links.
While fabric bracelets have been around for the longest time, definitely since my early blogging days, they’ve recently gained steam as bandana bracelets, although you can still use fun fabric scraps to make them.
There are so many different ways to make them and I’ve even shared two fun ideas for how to make braided bandana bracelets!
Now what about tying them off? Today I’m going to show you how to tie a bandana bracelet using four different techniques.
Now, while some of these might seem similar, they each have unique advantages and use scenarios. Some were born from having cut the fabric too short – but still fit in as an ideal solution. Some are more standard.
Whatever your reasons or your choice, I hope you find this tutorial for how to tie a bandana bracelet super helpful!
Watch the YouTube video for how to tie a bandana bracelet
Watch the full-length video on YouTube if you prefer to learn that way! Or scroll down for written instructions with photos.
How to tie a bandana bracelet 4 ways – Written Instructions
Method 1: Basic Tie (Big or Small)
The most obvious way to tie a bandana bracelet is to simply form two bunny ears and tie the sides together twice.
You can do this by keeping it small and compact or leaving it longer for the bandana/scarf style look.
Tying it shorter will make it harder to open and close. My recommendation would be to tie it just large enough to go over the wearer’s fists so that it can be slide on and off. It works best with fabrics that have a tiny bit of stretch so that they can be made small enough that they won’t slide off.
Tying a larger knot will make it easier to open and close. It will make things like writing and typing harder but it’s a summer camp type craft that kids can still have fun with, wear outside of school, or on their weak hand. And again, it’s more removable that way.
Method 2: Bow
I did not photograph this method (oops) but I did try tying a bow on once bracelet. This is best for bracelets that have longer and thinner bandanas, like the infinity bracelet that I made.
This allows it to be removable, and you don’t have to use extra hardware or findings. It also gives it a fun scarf-like look.
Method 3: Separate Ribbon
One of my favorite ways to maintain that scarf look but keep it a bit more compact is to use a separate ribbon to tie it. I did this also because I cut some of them too short, but again, it’s a great way to tie a bandana bracelet regardless.
Supplies:
- Ribbon crimps in assorted sizes
- Pliers
- Jumprings
- Ribbon (I used lace ribbon)
- Scissors
- Your bracelet that you’re finishing.
Step by step process for tying a bandana bracelet with a separate ribbon:
1. Begin by trimming the fabric on your bracelet to just barely fit around your wrist.
2. Fold the ends of the bracelet to fit neatly into a ribbon end crimp and crimp it shut. Note: You can use wider or narrower crimps for this – choose one that will comfortably fit your fabric!
Do this on each end.
3. Attach a jump ring to each end.
4. Cut a piece of ribbon about ten inches long (test your length – you need one that’ll comfortably tie a bow). Thread it through the two jump rings.
5. Tie your bow! It’s much more comfortable to wear than the full bulk of the bandana, you can swap them out to match different outfits, and it’s relatively easy to open and close.
Method 4: Clasp Closure
The final most polished way is to use an actual clasp to tie a bandana bracelet and not a ribbon. This has the most professional finish and is a great option if you’re selling your craft.
You do lose some of the charm of the bandana tie but it will really make your bracelet much more wearable.
To finish your bracelet with a clasp, simply follow the steps for the separate ribbon above. Instead of adding a ribbon through the loops, use smaller jumprings and attach a clasp.
I hope you enjoyed learning how to tie a bandana bracelet! Which is your favorite method? Comment below!
4 Ways to Finish Off Bandana Bracelets
While fabric bracelets have been around for the longest time, definitely since my early blogging days, they've recently gained steam as bandana bracelets, although you can still use fun fabric scraps to make them.
There are so many different ways to make them and I've even shared two fun ideas for how to make braided bandana bracelets!
Now what about tying them off? Today I'm going to show you how to tie a bandana bracelet using four different techniques.
Materials
- Ribbon crimps in assorted sizes
- Pliers
- Jumprings
- Ribbon (I used lace ribbon)
- Scissors
- Your bracelet that you're finishing.
Instructions
Method 1: Basic Tie (Big or Small)
You can do this by keeping it small and compact or leaving it longer for the bandana/scarf style look.
Tying it shorter will make it harder to open and close. My recommendation would be to tie it just large enough to go over the wearer's fists so that it can be slide on and off. It works best with fabrics that have a tiny bit of stretch so that they can be made small enough that they won't slide off.
Tying a larger knot will make it easier to open and close. It will make things like writing and typing harder but it's a summer camp type craft that kids can still have fun with, wear outside of school, or on their weak hand. And again, it's more removable that way.
Method 2: Bow
This is best for bracelets that have longer and thinner bandanas, like the infinity bracelet that I made.
This allows it to be removable, and you don't have to use extra hardware or findings. It also gives it a fun scarf-like look.
Method 3: Separate Ribbon
1. Begin by trimming the fabric on your bracelet to just barely fit around your wrist.
2. Fold the ends of the bracelet to fit neatly into a ribbon end crimp and crimp it shut. Note: You can use wider or narrower crimps for this - choose one that will comfortably fit your fabric!
Do this on each end.
3. Attach a jump ring to each end.
4. Cut a piece of ribbon about ten inches long (test your length - you need one that'll comfortably tie a bow). Thread it through the two jump rings.
5. Tie your bow! It's much more comfortable to wear than the full bulk of the bandana, you can swap them out to match different outfits, and it's relatively easy to open and close.
Method 4: Clasp Closure
The final most polished way is to use an actual clasp to tie a bandana bracelet and not a ribbon. This has the most professional finish and is a great option if you're selling your craft.
You do lose some of the charm of the bandana tie but it will really make your bracelet much more wearable.
To finish your bracelet with a clasp, simply follow the steps for the separate ribbon above. Instead of adding a ribbon through the loops, use smaller jumprings and attach a clasp.
