Heart Keychain Laser File SVG (Free Download)

I hope you love this free heart keychain laser file – and yes, it can also be used for Cricut projects, but a bit differently. If you enjoy this, check out these resin letter keychains as well. This post contains affiliate links.

---

It’s amazing to me that I haven’t even finished sharing my daughter’s dress up party from last year (you can see our dress up station here) and I’m already working hard on sharing her next birthday – a sleepover party! I designed this heart keychain laser file as a fun and inexpensive party favor to hand out, however, I figured I need to share it in time for Valentine’s Day because it’s perfect for that!

These are so quick and easy to engrave, cut, and put together and they use inexpensive basswood plywood sheets. And yes, you can also use acrylic! But I’m getting ahead of myself – let’s go through the details of this heart keychain laser file so you’ll know how to use it well!

How to Use This Heart Keychain Laser File

Laser Cutting them

These are designed for laser engraving and cutting. I used my LaserPecker LX2 – my full-sized Diode laser engraver. You can read my full review of the LaserPecker LX2 here and of course, I’ll share full tips for how to do it below.

Ultimately, laser engraving these gives you a ready-to-go result. You just pull them off the engraver, assemble them in minutes, and you have a finished product. It’s the best way – but not the only way to use this heart keychain laser file.

Cricut Crafting Variations

You CAN Cricut craft these! If you have a Maker, use the knife blade to cut it from wood. You can use a pen to draw the design right onto wood (I share how to do this in this or balsa wood Cricut tutorial). The design an outline so it’ll go over the whole thing twice – which will make it nice and bold.

Cricut cutting wood is quite inefficient but doable, so definitely opt for a laser if you can!

Some more ideas for how to Cricut craft this heart keychain laser file:

• Engrave leather bookmarks with the details, and cut them from leather. You may want to mirror the design as well to make it two-sided for added sturdiness.
• Cut the design from vinyl and attach them to round acrylic keychain blanks. You can make a two layer design with the details. You will need to remove the hole.
• Slice the details from the base design and make it from vinyl on a keychain blank. You’ll once again need to remove the hole.
• Same as the above – but try it from stiff felt and glue it onto a wooden keychain base.
• Engrave the design using your Cricut on an acrylic keychain blank (learn how to engrave acrylic on the Cricut here.)

There are so many ways you can use this heart SVG – you’ll just need to be a bit more creative!

More ways to finish them off

I added tassels that actually came with my acrylic keychain blanks to these. They are simple leatherette tassels – and yes, you can make your own leather tassels too!

Some more ways to finish this off and make it polished:

• Paint the wood before cutting and engraving. Use basic acrylic paint. I kind of regret not doing this.
• You can stain and/or seal your keychains after as well. If painting, use a thin wash and make sure it doesn’t fully color the insets.
• Leave it unfinished and let recipients color it themselves with paint markers (this is great if you’re making this for a party!)
• Use fun colorful keychains.
• Add hanging beaded charms to the keychians.

I made this on a whim with what I had but you can absolutely craft it cooler than I did!

Cutting this Heart Keychain Laser File on a Laser Engraver

I used my LaserPecker LX2 to engrave and cut these and I have so many tips for how you can do this. I used this laser as the best suited for the job, because it has a large bed, and as a gantry laser, you get good smooth cuts. In addition, the air assist feature helps minimize charring that often happens on wood.

Which type of laser can cut these?

Any Diode, CO2, or UV laser can cut wood. If crafting from acrylic, Diode lasers work beautifully on many shades of red and pink (read: which colors acrylic can a Diode laser cut for more tips on doing this).

A gantry style laser (the kind with a large bed and a module that moves around on a track) is better suited to cutting jobs than a galvo (the more compact kind where the laser moves around using mirrors – like the LaserPecker LP5 I reviewed here) because you get a straight-down cut, vs. the angled cut on a galvo.

It’s small enough that you CAN cut it on galvo lasers, and there are no parts that need to fit together. So it’ll cut very nicely on both types, although more efficiently on a gantry.

More cutting tips and tricks

While I made some mistakes on earlier rounds and did better on later rounds, I figured I’d offer you feedback on how to better cut this. If you’re new to laser engraving, I recommend you read my tips and guide for engraving wood with a laser where I share so much advice.

Meanwhile, here are some pointers:

• Score don’t engrave – on my earlier ones, I engraved the design. On later ones, I scored it. This moved so much faster and made a better line, while still retaining all the detail. Since the details are quite fine, it didn’t look outlined.
• Air assist – I sometimes forget to turn on air assist. If you have that feature, it can get you such a fabulous, clean finish, without charring.
• Secure your wood – If cutting multiples, it’s always worth taping or clamping down the wood you’re working with, just in case it shifts.
• Paint first – as I mentioned above, I regretted not adding a couple of coats of paint to the wood before cutting and engraving.
• Mask your wood – If you don’t have air assist, masking the wood with masking tape sheets first can help get you a cleaner cut. You may need to adjust your settings a bit to get the result you want through the tape.

How to make your keychains using the Heart Keychain Laser File SVG

This tutorial is based very specifically on how I crafted it. Of course, adjust for any of the variations I shared above.

Supplies Needed

• 3mm Basswood Sheets
• Laser Engraver (I used the LaserPecker LX2)
• Keychains
• Pliers
• Tassels

Process

1. Upload your file to your laser software and resize it to the size you want. Set the outline and hole to cut. Set the internal design to score.
2. Prep your wood as needed, load your wood, preview, and make sure that your environment is safe – properly ventilated, no laser light leak, etc. Engrave and cut your wood.
3. Remove your cutouts. Attach a tassel and keychain.

Your heart keychains are complete! I hope you enjoy this FREE heart keychain laser file and SVG!

Download your free heart keychain laser file

To download, fill out the form below. You’ll be signed up for our free newsletter – unsubscribe at any time in the footer of the emails. I respect your privacy and the law and won’t share your information with anyone.